PR Racing S1 V3 R FM EVO '20 2wd Off-Road Buggy Kit 75400026 OUT OF STOCK

Be the first to review this product

Regular Price: $489.99

Special Price: $358.98

Availability: Out of stock


(1) PR Racing S1 V3 R FM EVO 2wd Gear Diff Buggy Kit

2020 S1 V3 R FM EVO Includes:

• 3mm Aluminum Chassis (-3mm)

• Ultra-Low Type R Shock Towers

• Ultra Low Type R Shock Absorbers

• Gullwing Front and Rear A-Arms

• Includes LRC +2mm Hangers with pill inserts

• Aluminum Servo Mounts

• 4 Degree Caster Blocks

• 7 Degree Front Hinge Pin Block (+5mm)

• Aluminium Ackerman Plate

• Revised Carbon Steering Arm plates

• Front Aluminum Camber Plates

• Rear Aluminium Camber Plate

• -2mm Aluminum Motor Mount

• Alloy M5 front Axles

• 36mm Alloy Turnbuckles

• Carbon Fiber LiPo Straps

• Complete Sway Bar Set

• Vented Slipper Plates

• 34 Tooth Aluminum Idler Gear

• Fluid Filled Gear Differential

• Updated Rear Wing Mount

• New Type R Low Profile Buggy Body

Width: 250mm
Length: 411mm
Height: 145mm (with wing)
Wheelbase: 285mm
Front Track: 248mm
Rear Track: 248mm
Weight: 1450g Type R (approx)
Gear Ratio: 2.6:1

Specifications subject to change without notice.

INTERNATIONAL CUSTOMERS MUST CHOOSE A VALID OVER-SIZED SHIPPING METHOD BELOW. (international priority shipments not specified as over-sized will be shipped via standard rate shipping service)

PR S1 V3 R FM EVO '20 Main

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • PR S1 V3 R FM EVO '20 Main
  • PR S1 V3 R FM EVO '20 Chassis View
  • PR S1 V3 R FM EVO '20 Side View
  • PR S1 V3 R FM EVO '20 Front Suspension
  • PR S1 V3 R FM EVO '20 Rear Suspension
  • PR S1 V3 R FM EVO '20 Slipper Detail
  • PR S1 V3 R FM EVO '20 Rear View
  • PR S1 V3 R FM EVO '20 Bottom View
  • PR S1 V3 R FM EVO '20 Change Points


PR Racing S1 V3 R FM EVO '20 2wd Off-Road Electric 1/10th Scale Pro Racing Buggy features a new -3mm aluminum chassis with laydown 3 gear transmission with the capability of utilizing either a fluid filled gear or available ball differential better suited for low traction racing surfaces. Includes all new low profile shock absorbers, low mount towers, LRC suspension hangers and a whole range of optional parts previously only available separately. The new lower shock geometry and new sleek body produce a much more stable buggy on high grip surfaces which changes direction quicker, and rotates through the corner smoother and at a higher rate of speed.

The S1 V3 R FM EVO '20 utilizing a thick 3mm aluminum chassis focused on a low roll center design offering smoother handling and flatter cornering characteristics. Includes new gull wing front and rear suspension arms, front sway bars, pro carbon steering blocks and bleeder shock cap set. Also includes revised front and rear ultra low profile carbon fiber shock towers, 12.75mm ultra low profile big bore shocks with updated black anodized aluminum pre-load collars and redesigned lower spring retainers which allows use of most 12mm shock springs currently available on the market.

Aluminum Chassis:

The S1 V3 R FM EVO '20 features a new thicker 3mm aluminum chassis precision cut by state of the art CNC machines with fully countersunk screws offering a smooth snag free surface during hard cornering or landings. New -3mm chassis design accepts shorty, saddle or square pack lipo packs. Aluminum and Carbon Fiber chassis components further improves handling and provides a works appearance.

Adjustable Differential and Vented Slipper Clutch:

The S1 V3R FM EVO '20 is outfitted with a gear differential ideal for US style tracks with an optional ball differential available for use on low grip racing surfaces while the new aluminum top shaft and updated vented slipper clutch adapts to constantly changing track conditions.

Weight Balance and Battery Layout:

The S1 V3 R FM EVO '20 is configured as a mid-motor design utilizing a laydown 3 gear transmission to provide a ultra low center of gravity. The chassis is suitable for either vertical or horizontal battery configurations ideal for modern shorty style LiPo pack mounting to provide unparalleled corner speed. Correcting altitude in midair is easily accomplished, as the buggy flies straight and level while the alloy chassis is very forgiving of less than perfect landings.

12.75mm Big Bore Shocks:

The S1 V3 R FM EVO '20 includes hard anodized aluminum ultra low threaded shock bodies, bleeder style shock caps, black anodized pre-load collars and lower shock cartridge caps which are further complimented by 3mm long stroke shock shafts to provide increased dampening and smooth fluid suspension action. Large diameter pistons are securely held in place by a lock-nut directly to the 3mm shock shafts with worlds edition shock pistons included while various optional spring and pistons types are available for further fine tuning.

Ultra Low Carbon Fiber Shock Towers:

The S1 V3 R FM EVO '20 incorporates high quality ultra low carbon fiber shock towers with multiple upper shock and camber mounting locations to suit a wide range of track conditions.

Front and Rear Suspension:

The S1 V3 R FM EVO '20 includes gull wing composite front and rear a-arms mated to aluminum LRC suspension hangers with pill style inserts providing smooth accurate movement throughout the entire range of suspension travel while a full array of optional aluminum and brass weighted mounts are available separately.

CVD Drive Shafts:

The S1 V3 R FM EVO '20 rear CV axles are large in diameter and feature over-sized ball bearing captured drive pins, increasing durability of the drive train.

Current Style Lexan Body:

The S1 V3 R FM EVO '20 includes the cab-forward Type R body to generate increased down force while providing a distinctly modern design.

*PR S1 V3 R FM EVO kits do not include tires, wheels or electronics.

Qty 1

PR Racing P/N: 75400026

Free Domestic Standard Rate Shipping eligible on all PR Racing kits.

INTERNATIONAL CUSTOMERS MUST CHOOSE A VALID OVER-SIZED SHIPPING METHOD. (international priority shipments not specified as over-sized will be shipped via standard rate shipping service)

PR Racing orders are usually shipped within 2-4 business days from original order date.

Special order items may drop ship directly from the nearest PR Racing Distribution Center.

Print or Download Instruction Manual: PR Racing S1 V3 R FM EVO Instruction Manual